# How to find angle x marked in red? (bearings from Point X to pts R, S which are...)

• 02-08-2018, 10:11 PM
richiesmasher
How to find angle x marked in red? (bearings from Point X to pts R, S which are...)
Hi, I don't have much of an attempt here, but here goes nothing:
I'm trying to find the angle x marked in red, just trying to figure out methods using rules such as angles in a triangle, alternate etc.

I have two bearings marked in orange from Point X to points R and S which are 270 and 210 degrees respectively.

My thoughts are, angle RXS is actually 60 degrees, because of the bearing of S from X which is 210 degrees, and as you can see the 90 degree angle completes the full 360, so that is how I deduced this.

Angle TSX is 25 degrees because it's an alternate angle of the angle of depression of S from T which is also 25 degrees.

I'm racking my brain trying to see how I can single out x, I know it must be 25 minus something... but what?

All angles are in degrees by the way.
The question really asks to find the length of RS but I can do that easily once I have angle x in red.
Attachment 9133
• 02-08-2018, 11:13 PM
Denis
Quote:

Originally Posted by richiesmasher

Richie, that's gotta be your most confusing diagram so far :rolleyes:

Question:
angleRTS = 20 degrees (shown in brown)
That same angle is shown in blue as 35 - 25, thus 10 degrees
Am I seeing things?!

Curious: why show TX = 49m ?
• 02-08-2018, 11:29 PM
richiesmasher
Quote:

Originally Posted by Denis
Richie, that's gotta be your most confusing diagram so far :rolleyes:

Question:
angleRTS = 20 degrees (shown in brown)
That same angle is shown in blue as 35 - 25, thus 10 degrees
Am I seeing things?!

Curious: why show TX = 49m ?

No I actually wrote angle RTS is 10 degrees, perhaps it is difficult to see, well I showed it in case it had some relevance, I know exactly how to figure out the question, i just don't know how to find the angle i need to then utilize the sine rule.
• 02-09-2018, 12:36 AM
Denis
OK; looked like 20...

Had a more careful look using graph paper:

R is on line SX, thus TXR and TXS are both right triangles.
In other words, your x angle = 0 degrees!
TXR = 90-55-35 and TXS = 90-65-25

With TX = 49, Law of Sines makes it easy:
calculate XR, then XS; SR = XS - XR

That "210" simply shouldn't be there!
• 02-09-2018, 01:05 AM
richiesmasher
Quote:

Originally Posted by Denis
OK; looked like 20...

Had a more careful look using graph paper:

R is on line SX, thus TXR and TXS are both right triangles.
In other words, your x angle = 0 degrees!
TXR = 90-55-35 and TXS = 90-65-25

With TX = 49, Law of Sines makes it easy:
calculate XR, then XS; SR = XS - XR

That "210" simply shouldn't be there!

Wow, I surprised myself, thanks dennis your clue made me see it clearly, it's two right angled triangles, from there I calculated XS and XR using tan of angles 25 and 35, then simply used the cosine rule using the angle I got from the bearing 210 and my answer 92m is correct ;D
• 02-09-2018, 08:52 AM
Denis
I don't get that; what is equal to 92?
I get XS = ~105 and XR = ~70, so RS = ~35

But if you say 92 is the given answer, then I'm
certainly missing something.
It simply looks to me like the "210" appears in error.

I sure hope someone else has a go at this problem.
• 02-09-2018, 09:51 AM
richiesmasher
Quote:

Originally Posted by Denis
I don't get that; what is equal to 92?
I get XS = ~105 and XR = ~70, so RS = ~35

But if you say 92 is the given answer, then I'm
certainly missing something.
It simply looks to me like the "210" appears in error.

I sure hope someone else has a go at this problem.

Attachment 9134
Here is a better diagram, As you can see the triangle formed by the horizontal plane corresponds with the bearing 210. My reasoning was I need 360 degrees to complete the bearing, I already have 210 and I already have a 90, that gives me 300 degrees, so the only angle left to fill that space would be RXS which is 60 degrees, from there since i had the lengths of SX and RX, which were the same as yours, I applied the cosine rule because I had two sides and the angle inbetween.

They now ask for the bearing of S from R, final part of the question, I'm currently racking my brain on this too, however we have more information now, I have 3 sides of the triangle RSX and one angle, I can possibly work out the other angles using sine rule and perhaps that can give me a clue.
• 02-09-2018, 10:40 AM
Denis
Look at the diagram: you're saying that angleRXS = 60 degrees?
Impossible.
However, the word "bearing" gives me a headache.
I quit here!
Hope a better helper like DrP steps in.