# Thread: How to find angle x marked in red? (bearings from Point X to pts R, S which are...)

1. ## How to find angle x marked in red? (bearings from Point X to pts R, S which are...)

Hi, I don't have much of an attempt here, but here goes nothing:
I'm trying to find the angle x marked in red, just trying to figure out methods using rules such as angles in a triangle, alternate etc.

I have two bearings marked in orange from Point X to points R and S which are 270 and 210 degrees respectively.

My thoughts are, angle RXS is actually 60 degrees, because of the bearing of S from X which is 210 degrees, and as you can see the 90 degree angle completes the full 360, so that is how I deduced this.

Angle TSX is 25 degrees because it's an alternate angle of the angle of depression of S from T which is also 25 degrees.

I'm racking my brain trying to see how I can single out x, I know it must be 25 minus something... but what?

All angles are in degrees by the way.
The question really asks to find the length of RS but I can do that easily once I have angle x in red.
angles.jpg

2. Originally Posted by richiesmasher
Richie, that's gotta be your most confusing diagram so far

Question:
angleRTS = 20 degrees (shown in brown)
That same angle is shown in blue as 35 - 25, thus 10 degrees
Am I seeing things?!

Curious: why show TX = 49m ?

3. Originally Posted by Denis
Richie, that's gotta be your most confusing diagram so far

Question:
angleRTS = 20 degrees (shown in brown)
That same angle is shown in blue as 35 - 25, thus 10 degrees
Am I seeing things?!

Curious: why show TX = 49m ?
No I actually wrote angle RTS is 10 degrees, perhaps it is difficult to see, well I showed it in case it had some relevance, I know exactly how to figure out the question, i just don't know how to find the angle i need to then utilize the sine rule.

4. OK; looked like 20...

Had a more careful look using graph paper:

R is on line SX, thus TXR and TXS are both right triangles.
In other words, your x angle = 0 degrees!
TXR = 90-55-35 and TXS = 90-65-25

With TX = 49, Law of Sines makes it easy:
calculate XR, then XS; SR = XS - XR

That "210" simply shouldn't be there!

5. Originally Posted by Denis
OK; looked like 20...

Had a more careful look using graph paper:

R is on line SX, thus TXR and TXS are both right triangles.
In other words, your x angle = 0 degrees!
TXR = 90-55-35 and TXS = 90-65-25

With TX = 49, Law of Sines makes it easy:
calculate XR, then XS; SR = XS - XR

That "210" simply shouldn't be there!
Wow, I surprised myself, thanks dennis your clue made me see it clearly, it's two right angled triangles, from there I calculated XS and XR using tan of angles 25 and 35, then simply used the cosine rule using the angle I got from the bearing 210 and my answer 92m is correct ;D

6. I don't get that; what is equal to 92?
I get XS = ~105 and XR = ~70, so RS = ~35

But if you say 92 is the given answer, then I'm
certainly missing something.
It simply looks to me like the "210" appears in error.

I sure hope someone else has a go at this problem.

#### Posting Permissions

• You may not post new threads
• You may not post replies
• You may not post attachments
• You may not edit your posts
•